2.6G Fork mould
Category: Spoon/Fork/Knife/Tea spoon moulds
PS 2.6g Fork injection moulds plastic in huangyan moulding Details like this list
Mold item: Fork mold
Mold steel: choose 2316 forging and C50
Mold treatments: at final treatment by vacuum queching to 48-52°C or/Cav
Mold cavity: 25
Mold size: 520*520mm (also can depend on customer's machine design new mold size and frame)
Plastic material: PS
Mold cycle time: 15'/shot (did not connect cool water)
Mold doff way: Full automatic by ejectors
Mold minimum lifespan: 1,000,000 shots (if choose better steel will be longer)
Mold leading time: 1st arrange test mold within 50 days after receiving downpayment
Mold steel Uses Cr12, P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more
Mold cavity 1 or more (depend on client)
Surface treatments electroplate (in order to prevent rust), thur. nitrogen (in order to rise surface hardness), vacuum quenching (in order to rise whole hardness)
Plastic materials PP, PVC, PPR, ABS, PA, PC, POM, PS, PET, HDPE, LDPE, LLDPE and others
Software UG, PRO-E, MOLDFLOW, CAD, CAE, VISI
Mold gate way cold runner/hot runner/semi-hot runner
Hot runner brands HASCO, DME, YUDO, Chinese brands
Cold runner sub-gate, direct gate, 3 plates, side gate
Mold base HASCO, DME, LKM, HOME-MADE
Mold lifespan minimum lifespan 300,000 shots (better steel get longer lifespan)
Mold off ejectors, off-plate, air valves, hydraulic jars, air jars, air ejectors, oil-motor and more
Mold cooling Water cooling/air cooling/beryllium bronze cooling
Mold size will offer advice while send quotation
Mold fix machine better offered by client while inquiry
Mold price most reasonable as rich experience
Mold payment 50% down payment by T/T, 50% balance by T/T before shipment
Mold shipment ways By sea/air/train
Mold packaging packed into standard wooden cases
1) Mould structure design
Professional designers provide you with reasonably designed mould to shorten cycle hours.
Reducing unnecessary procedure improves efficiency.
2) Mould cooling system
According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.
3) Accessory for mould
Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.
4) Deal with mould
Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850
1) We can repair the mould in one year for some free and provide technology. .
2) Gurantee period is 12months starting from the date of moulds accept in the Buyer’s factory.
3) If the moulds happen the big problem, The moulds cannot repaired, the Buyer cannot solve the problems,eg, mould crack, product can’t moulding…any big problem(except the human error) due to the mould life can’t reach to guranteed shots.the Seller and Buyer's negotiate to slove the problem, the buyer can send it back to the factory to repair or If serious, the Seller have resposiblity to make new mould for the Buyer.