简体 English
返回
/
/
/
TPR End Cap Injection Mould
 ${ele.title}
 ${ele.title}
 ${ele.title}
 ${ele.title}
 ${ele.title}
 ${ele.title}
 ${ele.title}
 ${ele.title}

TPR End Cap Injection Mould

The mold has four cavities. 

Compared with the prior art, the utility model has the following beneficial effects: The TPR mold, through the sleeve, with the plunger, the adjacent two mould under drive inserted into the medial side, the side plate through the impetus driving under the influence of the inner plate and the locking lever to insert lock groove, the lateral movement and implementation under the two adjacent mould connection, at the same time the plunger, the outside of the plug at the top of the drive rod inserted into the adjacent slots in the inside of the push rod, In the mold of a single mold pressing molding, toggle on the mould, to make it through the inside of the sleeve ball sliding on the plunger, and will be on the die under the adjacent die on mobile, under the former working procedure of the mould during cooling of the adjacent mould pressing work.

Realized on a single die mould pressing, under the multiple improves the production efficiency, Greatly meet the needs of production.
Details

The mold has four cavities. 

Compared with the prior art, the utility model has the following beneficial effects: The TPR mold, through the sleeve, with the plunger, the adjacent two mould under drive inserted into the medial side, the side plate through the impetus driving under the influence of the inner plate and the locking lever to insert lock groove, the lateral movement and implementation under the two adjacent mould connection, at the same time the plunger, the outside of the plug at the top of the drive rod inserted into the adjacent slots in the inside of the push rod, In the mold of a single mold pressing molding, toggle on the mould, to make it through the inside of the sleeve ball sliding on the plunger, and will be on the die under the adjacent die on mobile, under the former working procedure of the mould during cooling of the adjacent mould pressing work.

Realized on a single die mould pressing, under the multiple improves the production efficiency, Greatly meet the needs of production.

 

MOULD  FAQ.

Q: what are the choices of die steel?

A: Roughly P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl and so on. according to the customer to the product hardness requirement choice.

 

Q: What are the ways of feeding mold?

A: Cold runner, hot Runner and semi-hot runner are the main types.

 

Q: How to choose whether to use hot runner?

A: OSKAI mould company will provide customers with advice. Mainly look at the production of the output and product requirements to decide whether to make hot runner.

Keyword:
cap
the
of
under
mould
on
adjacent
mold
through
die

CONTACT INFO

Linda

Mobile:+86-13586005286
Tel:+86-576-84796888
E-mail:lindazou@188.com
WhatsApp:008613586005286

Nora

Mobile:+86-18858665677
E-mail:Nora@chinese-mould.com

Copyright © 2022 Taizhou OSKAI Mould Factory 浙ICP备09086439号 Powered by 300.cn

WRITE A MESSAGE TO US

Online Inquiry

验证码