Plastic Top Cover Mould
Mold name
Top Cover Injection Mould
Mold cavity
1
Mold Steel
P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more
Mold gate way
cold runner
1st. Test mold time
45 days
Product material
ps/pp and so on
Package
PET film covered then packing into standard wooden case
The following is Oskai mold company in the mold closed height, installation and injection machine with each size, form, open mold distance, mold work requirements in line with the technical conditions of the selected equipment after the mold test finished products. The mold parts fit properly, no jam and tight phenomenon. Accurate positioning, the inlays and fasteners are firm without loosening phenomenon.
Our mould Quality Control.
For the Q/C of mould, there are 3 steps:
1.Mould Material Q/C
- Mould Steel Checking(Hardness, flaw detection)
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Making Process Q/C
- Design checking (part design, mould design, mould engineering drawing)
- Each part of mould's size checking after machining according to 2D drawing
- Mould testing(check mould running condition)
3.Check with customer's requirement again before mould shipping.
About our factory.
OSKAI MOULD has over 10 years experience in the design and manufacture of plastic injection mold, molding parts. Over the years OSKAI MOULD FACTORY has worked on numerous projects in many different manufacturing sectors.
Oskai mould has expertise in all areas of mould design including: hot nozzles; hot runner systems (single point and multi-drop); unscrewing tools; side cores; up & always; two stage ejection; hydraulic core pulling and more.
Mold name |
Top Cover Injection Mould |
Mold cavity |
1 |
Mold Steel |
P20, 718, 2738, 2344, 2316, S136, 3Cr13, 38CrMoAl, Mov and more |
Mold gate way |
cold runner |
1st. Test mold time |
45 days |
Product material |
ps/pp and so on |
Package |
PET film covered then packing into standard wooden case |
The following is Oskai mold company in the mold closed height, installation and injection machine with each size, form, open mold distance, mold work requirements in line with the technical conditions of the selected equipment after the mold test finished products. The mold parts fit properly, no jam and tight phenomenon. Accurate positioning, the inlays and fasteners are firm without loosening phenomenon.
Our mould Quality Control.
For the Q/C of mould, there are 3 steps:
1.Mould Material Q/C
- Mould Steel Checking(Hardness, flaw detection)
- Mould Standard Spare Parts Checking(hardness, size, flaw checking)
2. Mould Making Process Q/C
- Design checking (part design, mould design, mould engineering drawing)
- Each part of mould's size checking after machining according to 2D drawing
- Mould testing(check mould running condition)
3.Check with customer's requirement again before mould shipping.
About our factory.
OSKAI MOULD has over 10 years experience in the design and manufacture of plastic injection mold, molding parts. Over the years OSKAI MOULD FACTORY has worked on numerous projects in many different manufacturing sectors.
Oskai mould has expertise in all areas of mould design including: hot nozzles; hot runner systems (single point and multi-drop); unscrewing tools; side cores; up & always; two stage ejection; hydraulic core pulling and more.
Recommended Products
CONTACT INFO
Linda
Mobile:+86-13586005286
Tel:+86-576-84796888
E-mail:lindazou@188.com
WhatsApp:008613586005286
Nora
Mobile:+86-18858665677
E-mail:Nora@chinese-mould.com
WRITE A MESSAGE TO US
Online Inquiry