The mould of storage box adopts P20 forging. P20 die steel and Sweden 618 Germany GS-2311 status, can be directly used for mold processing, and has the characteristics of good dimensional stability. Uniform hardness, good polishing performance and photoetching performance, good processing performance, no reheat treatment can be directly used for mold processing, shorten the construction period. After forging and rolling processing, the structure is compact, without porosity and pinhole defects.

Mould FAQ.

Q :How many days will it take to make this mold?

A:Because OSKAI mold is roughly 45-55 days. The specific time depends on the mold size, steel material quality and processing technology.

Q: What if you could run cold? Or can you choose YUDO?

A:Yes, you can, everything can be chosen according to the exact demand, different demand can only offer different prices. Thank you very much!

Q:Can you repair the robot?

A:Yes, it can be fixed as a robot, so the moving distance of removing the template will be smaller than now, and it can have a better service life. Thank you very much!

OSKAI mould factory will offer free molds design service, everything can be discussed while design then can reduce delivery time. Meantime will send weekly process report then can control delivery time easy, if meet problem during process will point out at first time, discuss & re-design on time that can make sure delivery time under control always.

Technology. 

(1) Mould structure design. 

Professional designers provide you with reasonably designed mould to shorten cycle hours.

Reducing unnecessary procedure improves efficiency.

(2) Mould cooling system.

According to the structural characteristics of the product and the appearance of the product , We design a reasonable form of gate for mould, such as a large gate, hidden gate, fan gate, needle gate, pin point gate etc., a reasonable channel of runner design make mold temperature balance in the shortest time to improve mould precision and productivity.

(3) Accessory for mould.

Slide, guide pin, guide sleeve, lifter blocks and so on are taken by wear-resistant standard parts, to ensure the mould life.

(4) Deal with mould.

Quenching the mold, heat treatment to improve the hardness, then Nitriding temperature is lower , the mold will no longer need to quench mold with high surface hardness and wear resistance more than HV850.