Aluminum Leg armrest chair mould
Aluminum Leg armrest chair mould |
|
Mold Size |
1200x800mm / advice choose 880Ton injection machine |
Mold cavity |
single cavity |
Mold Steel |
P20 forging steel, the original hardness is HRC25-28 degree |
Mold steel treatment way |
At final arranged hardness treatment for the core and cavity plates to HRC32 degree |
Mold gate way |
Hot runner |
Mold uselife |
400000 shots |
Mold cycle time |
65 sec |
1st. Test mold time |
70 days after confirmed mold drawing files |
Mold doff way |
Ejectors |
Package |
PET film covered then packing into standard wooden case |
About injection mold quality control.
Q/C of the mold, as shown in the following table, has 3 steps:
1. Mold material Q/C.
Testing of die steel (hardness, flaw detection).
Mold standard spare parts inspection (hardness, size, defect inspection).
2. Mold manufacturing process Q/C.
-Design review (parts design, mold design, mold engineering drawing).
Check the dimension of all parts after machining according to 2D drawings.
Mold test (check mold operation).
3. Confirm customer's requirements again before mold shipment.
FAQ
Q:How about this chair mould weight?
A:It is about 5.5Ton.
Q:If cooling system good enough or not for this chair mould?
A:We designed separate cooling lines for this chair mould, and each turn over water hole distance from chair only about 20mm.
Q:How to make sure all of the sliders work full complete?
A:We fix the switch to control.
Q:If this armrest chair mould can work full automatic or not?
A:Yes, that can be. But on normal no need work full automatic as easy scratch surface texture.
More questions about the mould welcome contact with us.
Recommended Products
CONTACT INFO
Linda
Mobile:+86-13586005286
Tel:+86-576-84796888
E-mail:lindazou@188.com
WhatsApp:008613586005286
Nora
Mobile:+86-18858665677
E-mail:Nora@chinese-mould.com
WRITE A MESSAGE TO US
Online Inquiry